Powered by GoogleTranslate

Violation Detail

Standard Cited: 5A0001 OSH Act General Duty Paragraph

Inspection Nr: 909465.015

Citation: 01001

Citation Type: Serious

Abatement Status: Abatement Completed

Initial Penalty: $7,000.00

Current Penalty: $7,000.00

Issuance Date: 11/15/2013

Nr Instances: 1

Nr Exposed: 6

Abatement Date: 12/03/2013

Gravity: 10

Report ID: 0627100

Contest Date: 12/10/2013

Final Order: 01/29/2015

Related Event Code (REC): C

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty F: Formal Settlement 01/29/2015 $7,000.00 12/03/2013 Serious  
Penalty C: Contested 12/10/2013 $7,000.00 12/03/2013 Serious  
Penalty Z: Issued 11/15/2013 $7,000.00 12/03/2013 Serious  

Text For Citation: 01 Item/Group: 001 Hazard:

OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by and caught-in between hazards. On or about May 24, 2013, and at times prior thereto, at the Spiral "Final" Department, an employee's leg was caught between a moving pipe and a stationary pipe bumper. An 80-1" pipe had been conveyed down to an employee for visual inspection. The visual inspector noticed that the pipe was longer than normal and determined that once the pipe was conveyed to the visual inspection workstation it would not fit without being obstructed by the work platform. The employee was told by the lead supervisor to jog the magnetic proximity sensor, located below the conveyor, to move the pipe further down the conveyor, so it would have clearance to be transported over to the visual inspector workstation. The employee jogged the magnetic proximity sensor and the grinderman who operates the pipe conveyor limit switch had a makeshift instrument holding the switch in the forward position and the pipe continued down the conveyor and the visual inspector's right thigh was caught in between the convex edge of the pipe and the Teflon stopping block. The employer's own procedures and actions did not afford effective protection to the workers, in that the workers were exposed to hazards associated with being struck by and caught-in between conveyed piping and the Teflon stopping block.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close