Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 315277541
Citation: 01001
Citation Type: Serious
Abatement Date: 11/16/2011
Initial Penalty: $7,000.00
Current Penalty:
Issuance Date: 11/07/2011
Nr Instances: 1
Nr Exposed: 19
Related Event Code (REC): A
Gravity: 10
Report ID: 0627510
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/28/2011 | 11/16/2011 | Serious | ||
| Penalty | Z: Issued | 11/07/2011 | $7,000.00 | 11/16/2011 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the condition(s) listed below: Robinson Drilling of Texas, Ltd., Rig 3, Truitt Woods #1, Dawson County, TX. For the period of time up to and including 06/11/11, the kelly bushing was worn, allowing it to 'stick' to the drill stem, causing struck-by injuries. According to Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations, API Recommended Practice 54, Third Edition, August 1999, Reaffirmed, March 2007, page 19, section 9.8.3 states "The kelly bushing shall be of smooth design to prevent catching or snagging of personnel, clothing, or material." Feasible and acceptable abatement methods would include: a. Regularly inspect the kelly bushing for defects and document the results of the inspections and maintenance / repairs if needed. b. Train employees of the dangers associated with a kelly bushing that is not smooth.