Powered by GoogleTranslate

Violation Detail

Standard Cited: 618037501 Nevada General Duty Clause

Inspection Nr: 314886169

Citation: 01001

Citation Type: Repeat

Abatement Status: X

Initial Penalty: $9,800.00

Current Penalty: $5,880.00

Issuance Date: 11/12/2010

Nr Instances: 8

Nr Exposed: 2

Abatement Date: 11/20/2010

Gravity: 10

Report ID: 0953220

Contest Date:

Final Order:

Related Event Code (REC): R

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty I: Informal Settlement 12/01/2010 $5,880.00 11/20/2010 Repeat  
Penalty Z: Issued 11/12/2010 $9,800.00 11/20/2010 Repeat  

Text For Citation: 01 Item/Group: 001 Hazard: UNCLASS

Nevada Revised Statute 618.375(1): Duties of employers. The employer failed to furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to his employees: The employer failed to ensure that the following processes were implemented and maintained in accordance with ANSI/ALI ALOIM-2008 as follows: a.Operator Training Documentation. Mechanics who use the auto lifts were not trained in accordance with ANSI/ALI ALOIM-2008, page 6, para. 4.3. Training was not provided and documented for employees. b.Daily Inspections. The employer did not inspect all the required items during the inspection process in accordance with ANSI/ALI ALOIM-2008, page 6 para. 4.4.4. No daily inspection documentation was provided during the inspection. c.Qualified Inspection Procedure. The employer did not establish a periodic inspection procedure in accordance with the recommendations of the lift manufacturer in order to ensure reliability and allowed the continued safe operation of the lift as stated in ANSI/ALI ALOIM-2008, page 7, para. 5.1. d.Inspection Points. The employer did not establish and ensure that inspection points were performed in accordance with ANSI/ALI ALOIM-2008, page 8, para. 5.6.2.1 to 5.6.2.28 and 5.6.3 to 5.6.3.10. e.Planned Maintenance. The employer did not establish and ensure that planned maintenance was performed and documented in accordance with ANSI/ALI ALOIM-2008, page 12, para. 6.1.1 and page 13, para. 6.1.4 and 6.1.5. A feasible means of abatement would be to follow the requirements of the ANSI/ALI ALOIM 2008 to allow the continued safe operation of the automobile lifts. SCHER'S SUPERIOR TIRE WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD WHICH WAS CONTAINED IN OSHA INSPECTION 311018394, CITATION NUMBER 01 ITEM NUMBER 001, WITH A FINAL ORDER DATE OF AUGUST 23, 2007.T

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close