Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 314352477
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $5,000.00
Current Penalty: $3,500.00
Issuance Date: 11/04/2011
Nr Instances: 15
Nr Exposed: 6
Abatement Date: 12/07/2011
Gravity: 05
Report ID: 0215800
Contest Date: 11/23/2011
Final Order: 10/15/2012
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 10/15/2012 | $3,500.00 | 12/07/2011 | Serious | |
| Penalty | I: Informal Settlement | 08/31/2012 | $3,500.00 | 12/07/2011 | Serious | |
| Penalty | Z: Issued | 11/04/2011 | $5,000.00 | 12/07/2011 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: LIFTING
3.Bldg. 82-1, Heat Treat, on or about 7/14/11: A series of shop made below-the-hook lifting devices, racks and baskets had no rated load capacity markings and had not been inspected. 4.Bldg 80, By Furnace, on or about 5/24/11: Two spreader beams and three baskets used as below-the-hook lifting devices had no rated load capacity markings and had not been inspected. Among other methods, feasible and acceptable abatement methods to correct these hazards are to: 1.Inspect the lifting devices in accordance with ANSI B30.20-2010, Section 20-1.3. 2.Mark the rated load capacity on the device in accordance with ANSI B30.20-2010, Section 20-1.2. Abatement certification must be submitted for these items.