Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 314345091
Citation: 01001
Citation Type: Serious
Abatement Date: 11/01/2010 X
Initial Penalty: $1,750.00
Current Penalty: $1,137.50
Issuance Date: 09/29/2010
Nr Instances: 2
Nr Exposed: 2
Related Event Code (REC):
Gravity: 03
Report ID: 0215800
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/12/2010 | $1,137.50 | 11/01/2010 | Serious | |
| Penalty | Z: Issued | 09/29/2010 | $1,750.00 | 11/01/2010 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the load should the overhead hoist fail: a)Molding Dept., on or about 5/17/10: A two ton Spacemaster overhead hoist and a CM Shopair overhead hoist had not been inspected and the CM Shopair had no rated load capacity marking on it. Among other methods, feasible and acceptable abatement methods to correct these hazards are to: 1.Mark the rated load capacity on the hoist in accordance with ANSI B30.16- 1993, Section 16-1.1. 2.Inspect the overhead hoists in accordance with ANSI B30.16-1993, Section 16- 2. Abatement certification must be submitted for this item.