Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 313754145
Citation: 01001
Citation Type: Serious
Abatement Status:
Initial Penalty: $2,500.00
Current Penalty: $2,500.00
Issuance Date: 12/04/2009
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 12/16/2009
Gravity: 03
Report ID: 0214200
Contest Date: 12/28/2009
Final Order: 05/24/2010
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 05/24/2010 | $2,500.00 | 12/16/2009 | Serious | |
| Penalty | Z: Issued | 12/04/2009 | $2,500.00 | 12/16/2009 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to being struck by falling packages: a) PD 18 Area Broken side pan/chute wall on the "mis-sort" side of the conveyor exposes employees driving/walking beside and/or under the conveyor to being struck by falling boxes. Violation was observed on or about 11/9/09. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS TO: 1. Fix any side pans/chute walls that are reported as broken or ineffective as quickly as possible. 2. If a broken side pan/chute wall cannot be fixed immediately, place warning signs and/or barricades that warn and/or prevent personnel from driving and/or walking beside/under the conveyor system.
Translate