Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 313031114
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $1,625.00
Current Penalty: $1,300.00
Issuance Date: 12/17/2010
Nr Instances: 1
Nr Exposed: 7
Abatement Date: 12/22/2010
Gravity: 05
Report ID: 0625700
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/06/2011 | $1,300.00 | 12/22/2010 | Serious | |
| Penalty | Z: Issued | 12/17/2010 | $1,625.00 | 12/22/2010 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck-by unsecured air hose connections. Numerous high pressure air hoses were located under the vessel, on the main deck and within the vessel and the air couplings were not secured to prevent them from coming apart. The hoses were being used to provide compressed air to power the various air powered tools on and in the jack-up-boat under construction. Among other methods, one feasible and acceptable abatement method is to secure the hose couplings with safety clips, retainers, or other positive means to prevent the couplings from becoming disconnected in accordance with manufacturers recommendations. DISCLAIMERS: 1) You are not limited to the abatement methods suggested above. 2) The methods explained are general and may not be effective in all cases. 3) The employer is responsible for selecting and carrying out an appropriate method of abatement.
Translate