Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 312597891
Citation: 01001
Citation Type: Serious
Abatement Status: I
Initial Penalty: $450.00
Current Penalty: $300.00
Issuance Date: 12/22/2009
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 12/28/2009
Gravity: 01
Report ID: 0521700
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/19/2010 | $300.00 | 12/28/2009 | Serious | |
| Penalty | Z: Issued | 12/22/2009 | $450.00 | 12/28/2009 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CONFINED
Section 5(a)(1) of the Occupational safety and Health Act of 1970: the employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazards associated with working in a confined space: a. On or about July 29, 2009, at a jobsite located at 1510 W. Cortez Street, Chicago, Illinois - employees were performing carpentry work from a platform (jobmade wooden box) on the forks of a rough terrain forklift truck. The operator did not remain in the cab to operate the controls, while employees were elevated in the platform. The platform in which the employees were working was not equipped with controls. Among other methods, one feasible and acceptable means to correct these hazards are to use a safer alternate method such as: Follow the American National Standard Safety Standard for Rough Terrain Forklift Trucks ASME B56.6-2002, Section 5.15(s) a trained operator shall be in position to control the rough terrain forklift truck, or available to operate controls if the platform is not equipped with controls.
Translate