Translate
Violation Detail
Standard Cited: 19260451 G04 IV General requirements.
Inspection Nr: 311441216
Citation: 01001
Citation Type: Other
Abatement Status: X
Initial Penalty: $3,000.00
Current Penalty: $1,125.00
Issuance Date: 11/08/2007
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 11/18/2007
Gravity: 10
Report ID: 0215000
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/27/2007 | $1,125.00 | 11/18/2007 | Other | |
| Penalty | Z: Issued | 11/08/2007 | $3,000.00 | 11/18/2007 | Other |
Text For Citation: 01 Item/Group: 001 Hazard: GUARDING
Grove #73 SM3146E: A midrail of a guardrail was damaged, and a gate was not properly closed. "The instance is amended to allege a violation of 29 CFR & 1926.451(g)(4)(iv). The characterization is amended to "Other." The instance is not otherwisw amended. Instance (b) is withdrawn. Basement South West Corner: On or about October 18, 2007 Employees were exposed to the hazards associated with operating a scissors lift. a) Grove #73 SM3146E: Guardrails were improperly installed and gates and openings were not closed. b) Grove #74 SM3146E: A weld was completely separated on the access ladder. Among other feasible and reasonable abatement methods to correct this hazard would be to implement the requirements outlined in the American National Standards Institute's standard for Self propelled elevating work platforms, ANSI A92.6 1990, Section 14.1 Operation and 14.2 Restrictions and Requirements. These requirements include but are not limited to "14.2(5)Ensure that guardrails are properly installed and gates or openings are closed." 14.1.2(1) Inspection for defects such as cracked welds. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN ACCORDANCE WITH 29 CFR 1903.19.CE