Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 311398556
Citation: 01001
Citation Type: Serious
Abatement Date: 07/14/2008 X
Initial Penalty: $1,375.00
Current Penalty: $962.50
Issuance Date: 06/11/2008
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 03
Report ID: 0523400
Contest Date:
Final Order:
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/24/2008 | $962.50 | 07/14/2008 | Serious | |
Penalty | Z: Issued | 06/11/2008 | $1,375.00 | 07/14/2008 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: BURNS
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm, including severe burns, to employees in that workers were exposed to dust explosion, deflagration, or other fire hazards from dust collectors being located inside a building: (a) Gluing and Routing Area - There was a dust collector located in close proximity to the Routing operation which was located inside the building containing the Gluing and Routing Area. AMONG OTHER METHODS, A FEASIBLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS TO RELOCATE THE DUST COLLECTION SYSTEM OUTSIDE THE BUILDING. Certification, and documentation/evidence of abatement is required. Certification of abatement is required by 29 CFR Part 1903 and is to be submitted that were causing or likely to cause death or serious physical harm, including severe burns, to employees in that workers were exposed to dust explosion, deflagration, or other fire hazards from dust collectors being located inside a building: (a) Gluing and Routing Area - There was a dust collector located in close proximity to the Routing operation which was located inside the building containing the Gluing and Routing Area. AMONG OTHER METHODS, A FEASIBLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS TO RELOCATE THE DUST COLLECTION SYSTEM OUTSIDE THE BUILDING. Certification, and documentation/evidence of abatement is required. Certification of abatement is required by 29 CFR Part 1903 and is to be submitted within ten (10) calendar days after the abatement date.ment