Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 310630975
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $3,500.00
Current Penalty: $1,750.00
Issuance Date: 04/09/2009
Nr Instances: 23
Nr Exposed: 20
Abatement Date: 05/12/2009
Gravity: 10
Report ID: 0112600
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/13/2009 | $1,750.00 | 05/12/2009 | Serious | |
| Penalty | Z: Issued | 04/09/2009 | $3,500.00 | 05/12/2009 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CRUSHING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm in that employees are exposed to struck by or crushed by hazards. FREQUENT AND PERIODIC INSPECTIONS WERE NOT CONDUCTED ON THE FOLLOWING HOISTS: a. ZINC LINE -- A CM, MODEL 6, SERIAL #1-Z360W, 1/4-TON HOIST; A CY HEDT, MODEL LHH-1A, 1-TON HOIST; b. NICKEL STRIP LINE -- A CM, MODEL HURRICANE, SERIAL #BOG4690, 1/4-TON HOIST; c. E NICKEL LINE -- A CM, MODEL B, SERIAL #L4405TA, 1/4-TON HOIST; A CM, MODEL M, SERIAL #173, 1-TON HOIST; A CM, MODEL 02, SERIAL #L-11460, 1/4-TON HOIST; d. ANODIZE LINE -- A CM, MODEL B, SERIAL #L3861RZ, 1/4-TON HOIST; A HARRINTON, MODEL AH500, SERIAL #OFO97, 1/4-TON HOIST; d. CAD LINE -- A DAYTON, MODEL 3KR14, SERIAL #GJLA-531-VM, 1/4-TON HOIST; A CM, MODEL J, SERIAL #0289-PD, 1/4-TON HOIST; AN ARO, MODEL 7700C, SERIAL #1004DG7, 300 LB. HOIST; e. STRIP LINE -- A CM, MODEL J, SERIAL #132-0, 1/4-TON HOIST; f. S NICKEL LINE - A CM, MODEL UNKNOWN, SERIAL #L-0818MH, 1/4-TON HOIST; A CM, MODEL UNKNOWN, SERIAL #L-0694PC, 1/4-TON HOIST; g. PHOSPHATE LINE -- A YALE, MODEL MOTOR TROLLEY, SERIAL #07-612M, 1/4- TON HOIST; A YALE, MODEL KEL1/210TH30S, SERIAL #190Z1537, 1/4-TON HOIST; h. HARDCOAT LINE -- A YALE, MODEL D, SERIAL #26F2675, 1/2-TON HOIST; A YALE, MODEL 11RT60S, SERIAL # UNKNOWN, 1/2-TON HOIST; i. MASKING LINE -- A DUFF LYNX, MODEL GZ-8707, SERIAL #LHH-1A, 1-TON HOIST; j. SOLVENT LINE -- AN ELECTRO LIFT, MODEL UNKNOWN, SERIAL # UNKNOWN, 1/2-TON HOIST; k. PAINT LINE -- A GORBEL, MODEL SS-9904Z, SERIAL #G59659, 1-TON HOIST; A YALE, MODEL BU12, SERIAL # UNKNOWN, 2-TON HOIST; A PITTSBURGH, MODEL 996, SERIAL #RX 10548, 1-TON HOIST. Among other methods, a feasible and acceptable means to correct the hazard is to follow the manufacturer's/owner manual recommendations for frequent and periodic inspection(s) of each type of hoist used, and/or to establish and follow a program of frequent and periodic inspection(s) of the hoists in accordance with ASME B30.16-2003, American Society of Mechanical Engineers for Overhead Hoists (Underhung), Section B30.16-2.1.5. ABATEMENT DOCUMENTATION IS REQUIRED 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is completed and 29 CFR 1903.19(d) requires documentation demonstrating that abatement has been completed.