Violation Detail
Standard Cited: 95012901
Inspection Nr: 308549856
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty:
Current Penalty:
Issuance Date: 04/15/2005
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 06/16/2005
Gravity:
Report ID: 0453710
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | 06/03/2005 | 06/16/2005 | Serious | ||
| Penalty | Z: Issued | 04/15/2005 | 05/11/2005 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards: a)establishment, alignment rack - where an In-ground Semi Hydraulic Lift was missing its "safety pin" to prevent lift from falling. The employees were not trained to recognize the hazard or to remove defective equipment out of service. Abatement note: One feasible and acceptable abatement method, among others, to correct this hazard is provide operator training to recognize hazards, and to ensure that the lift is not used until the repairs have been made. [Reference ANSI B153.1-1981; Safety Requirements for the construction, care and use of automotive lifts, Section 6: Maintenance, Use, and Inspection. 6.1 Maintenance. Maintenance procedures shall be described by lift manufacturer. The owner or employer shall maintain and care for the lift to ensure its continued safe operation.]r.
Translate