Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 307662783
Citation: 01001
Citation Type: Serious
Abatement Date: 03/29/2005
Initial Penalty: $750.00
Current Penalty:
Issuance Date: 02/22/2005
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 03
Report ID: 0216000
Contest Date: 04/19/2005
Final Order: 09/07/2005
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 09/07/2005 | 03/29/2005 | Serious | ||
| Penalty | Z: Issued | 02/22/2005 | $750.00 | 03/29/2005 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CAUGHT
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard being caught by rotating parts: Location: 806 Fairmont Place On or about 1/20/05, a) A Rigid 300 pipe threading machine was not provided with an effective means to shut off the power other than the motor control switch located on the frame of the machine. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THE HAZARD IS: To install a momentary contact device and follow the Ridge Tool Company's "Important Footswitch Policy" described in the letter to All Rigid Distributors dated October 26, 1987 and in the letter dated February 2, 1993 to All Authorized Service Centers. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.ce