The L.S.Starrett Company | Occupational Safety and Health Administration osha.gov

Violation Detail

Standard Cited: 95012901

Inspection Nr: 307447292

Citation: 01001

Citation Type: Serious

Abatement Date: 12/20/2004 I

Initial Penalty: $1,225.00

Current Penalty: $1,100.00

Issuance Date: 12/15/2004

Nr Instances: 1

Nr Exposed: 5

Related Event Code (REC): A

Gravity:

Report ID: 0453720

Contest Date:

Final Order:

Emphasis:

**Penalty and Failure to Abate Event History**
Type	Latest Event	Event Date	Penalty	Abatement Due Date	Citation Type	Failure to Abate Inspection
Penalty	I: Informal Settlement	01/11/2005	$1,100.00	12/20/2004	Serious
Penalty	Z: Issued	12/15/2004	$1,225.00	12/20/2004	Serious

Text For Citation: 01 Item/Group: 001 Hazard: DUST&FUMES

North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to fire/explosion: a)saw division - the employer failed to properly operate and maintain the #3 Guyson Bandsaw Blade Descaler model #BF/100, serial #4607,/Guyson Dust Collector, serial #D31097, by allowing sawblades coated with LOGRIND 600 grinding oil to be processed; did not properly adjust the blast gate control which allowed fine particles to enter the dust collector; had not periodically inspected/cleaned the dust collector; these conditions contributed to the fire/explosion on June 22, 2004. Feasible and acceptable abatement method(s) to correct this hazard would include ensuring that employees follow appropriate procedures, such as removing oil from any saw blades processed in the Descaler and following the instructions outlined in the Operating and Maintenance Manual for the BF 100 Continuous Bandsaw Blade Descaler (page 2-3) "ATTENTION DO NOT introduce work pieces with oil, grease, water or other types of liquid, bituminous, paste compounds which could mix with the blasting media compromise normal machine performance. DO NOT introduce material into the machine which when subjected to blasting could release gas or self inflammable elements." Also follow the requirements in the SET UP AND OPERATION section of the Guyson Dust Collector Manual which states "Inspect contents of dust barrel. If the system is set properly, approximately 5good media should be found in the barrel."ately

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.