Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 305973836
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $700.00
Current Penalty: $490.00
Issuance Date: 01/15/2003
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 02/11/2003
Gravity: 02
Report ID: 0524200
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/03/2003 | $490.00 | 02/11/2003 | Serious | |
| Penalty | Z: Issued | 01/15/2003 | $700.00 | 02/11/2003 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: ELECTRIC
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the rotating blade. a) Tool Room - The Meba horizontal band saw type 250-6442, was not equipped with a magnetic restarter or similar device, as prescribed by the American National Standards, ANSI B11.10-1990, Section 5.2.3.4, that in the event of an interruption in the electrical supply would prevent the saw from restarting automatically when power is restored. A feasible means of abatement would be to provide a magnetic restarter or similar device as required by ANSI B11.10-1990. Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).