Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 305786469
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $2,125.00
Current Penalty: $1,275.00
Issuance Date: 07/08/2003
Nr Instances: 1
Nr Exposed: 11
Abatement Date: 08/10/2003
Gravity: 03
Report ID: 0213100
Contest Date: 07/15/2003
Final Order: 09/16/2004
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 09/16/2004 | $1,275.00 | 08/10/2003 | Serious | |
| Penalty | Z: Issued | 07/08/2003 | $2,125.00 | 08/10/2003 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CRUSHING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that: Employees were exposed to the hazard of being caught in or crushed by a moving conveyor: Or, in the alternative; 29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by: ingoing nip points and moving/rotating parts: (a)Tunnel: Conveyor was not guarded and/or equipped with an audible start- up alarm and emergency stop device, on or about 01/27/03. Among others, one feasible method of abating the hazard includes: Installation of an audible start-up alarm, emergency stop device, and guarding which meets the requirements of ANSI/ASME B.20.1-1987, Safety Standard for Conveyors and Related Equipment. ABATEMENT CERTIFICATION REQUIREDATION
Translate