Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 302698568
Citation: 01001
Citation Type: Serious
Abatement Date: 06/27/2001
Initial Penalty: $700.00
Current Penalty: $700.00
Issuance Date: 06/14/2001
Nr Instances: 2
Nr Exposed: 2
Related Event Code (REC):
Gravity: 02
Report ID: 0215800
Contest Date: 07/06/2001
Final Order: 10/19/2001
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 10/19/2001 | $700.00 | 06/27/2001 | Serious | |
| Penalty | Z: Issued | 06/14/2001 | $700.00 | 06/27/2001 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: LIFTING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck-by the falling loads: a)Route 11 & 81 bridge, on or about 6/5/01: Overhead chain hoist used for lifting work platforms: 1)4 hoists were not being inspected on a frequent and periodic basis. 2)Safety clip on hook was missing. ABATEMENT NOTES: Among other methods, one feasible method of abatement is to: 1). Conduct frequent and periodic inspections of the chain hoists for wear, deterioration and malfunction as per ASME B30.16-1987. 2). Replace safety clip on hook. Abatement certification must be submitted for this item.