Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 302695846
Citation: 01001
Citation Type: Serious
Abatement Date: 08/24/2001 X
Initial Penalty: $1,250.00
Current Penalty: $750.00
Issuance Date: 06/29/2001
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 03
Report ID: 0215800
Contest Date:
Final Order:
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 07/16/2001 | $750.00 | 08/24/2001 | Serious | |
Penalty | Z: Issued | 06/29/2001 | $1,250.00 | 08/01/2001 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CRUSHING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being pulled into and crushed by the rotating parts of a pipe threading machine. a)Maintenance Department, on or about 4/26/01: Ridgid Pipe Threader, Model No. 500, activated by a manually operated on/off switch that would not automatically shut the machine off should the operator be inadvertently caught up in the rotating parts. Among other methods, one feasible method to reduce this hazard is to install a momentary contact device (deadman foot switch) to control power input to the machine. This device would automatically stop the machine and the rotating parts if the operator's foot was removed from the foot switch for any reason. Abatement certification is required for this item.