Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 301604252
Citation: 01001
Citation Type: Serious
Abatement Status: E
Initial Penalty: $5,390.00
Current Penalty: $2,000.00
Issuance Date: 01/06/2012
Nr Instances: 3
Nr Exposed: 5
Abatement Date: 01/30/2012
Gravity: 10
Report ID: 0522900
Contest Date: 01/26/2012
Final Order: 08/12/2013
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 08/12/2013 | $2,000.00 | 01/30/2012 | Serious | |
| Penalty | Z: Issued | 01/06/2012 | $5,390.00 | 01/30/2012 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CRUSHING
OSH Act Sec. 5(a)(1) of the Occupational Safety and Health Act of 1970: The empl oyer did not furnish employment and a place of employment which were free from r ecognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of crushing inju ries: a. On or about July 13, 2011 employees were exposed to the hazard of being crushed/struck-by materials being handled by a P&H crane serial # 1860 in build ing one (1) red building with an inoperative safety latch on the hook of the hoi st. b. On or about July 13, 2011 employees were exposed to the hazard of being c rushed/struck-by materials being handled by cranes while operating a P&H crane s erial # CH15121 in building one (1) red building with an inoperative safety latc h on the hook of the hoist. c. On or about July 13, 2011 employees were exposed to the hazard of being crushed/struck-by materials being handled by a P&H crane serial # RA76233 in building one (1) red building with an inoperative safety latch on the hook of the hoist. Amon g other methods, one feasible and acceptable abatement method to correct the haz ard is to repair or replace the safety latches in accordance with ASME B30.10-20 09, American Society of Mechanical Engineers for Hooks, Section 10-1.10.6(c). ** * Abatement Documentation is required in accordance with 29 CFR 1903.19(d).***
Translate