Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 301442786
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $1,125.00
Current Penalty: $562.50
Issuance Date: 01/21/2003
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 03/10/2003
Gravity: 01
Report ID: 0112000
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/06/2003 | $562.50 | 03/10/2003 | Serious | |
| Penalty | Z: Issued | 01/21/2003 | $1,125.00 | 03/10/2003 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to falling loads: ASSEMBLY ROOM: THE WIRE ROPE PROVIDED ON THE DAYTON 500 POUND OVERHEAD HOIST WAS WORN AND DAMAGED. IT WAS USED WITH THE CNC CHIP COLLECTION SYSTEM. ONE FEASIBLE AND USEFUL METHOD TO CORRECT THE HAZARD, AMONG OTHERS, IS TO: 1.REPLACE THE WORN DAMAGED WIRE ROPE ON THE DAYTON HOIST. 2.IMPLEMENT A PROGRAM OF REGULAR, DOCUMENTED HOIST INSPECTIONS AND PERFORM MAINTENANCE/REPAIR AS NEEDED.