Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 300632817
Citation: 01001
Citation Type: Serious
Abatement Status: I
Initial Penalty: $2,125.00
Current Penalty: $1,275.00
Issuance Date: 07/27/1999
Nr Instances: 3
Nr Exposed: 3
Abatement Date: 07/30/1999
Gravity: 03
Report ID: 0215800
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/17/1999 | $1,275.00 | 07/30/1999 | Serious | |
| Penalty | Z: Issued | 07/27/1999 | $2,125.00 | 07/30/1999 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to THE HAZARD OF BEING STRUCK-BY THE LOAD: a)Foundry Area, on or about 03/04/99; Two Lo Head Class B hoists (bridge cranes) did not have the rated load/capacity marked on them. ABATEMENT NOTES: 1.Mark the rated load/capacity on the hoist. 2.Follow the requirements of American National Standard for Overhead Hoists (ASME/ANSI B30.16 - 1987), Section 16-1.1. b)Foundry, E-Melt Area, on or about 03/05/99; One Robbins & Meyers model D3-3-17 hoist (charger crane), the pendant control controller's functions were not labeled as to indicate the direction of resultant motion. ABATEMENT NOTES: 1.Mark each control actuator to indicate the direction of resultant motion. 2.Follow the requirements of American National Standard for Overhead Hoists (ASME/ANSI B30.16 - 1987), Section 16-1.2.