Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 300132255
Citation: 01001
Citation Type: Serious
Abatement Date: 03/06/1997 I
Initial Penalty: $2,000.00
Current Penalty: $1,000.00
Issuance Date: 03/03/1997
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 10
Report ID: 0214700
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/24/1997 | $1,000.00 | 03/06/1997 | Serious | |
| Penalty | Z: Issued | 03/03/1997 | $2,000.00 | 03/06/1997 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: FALLING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: The hazard of falling. (a) West side of the building, employee working in a scissor lift approximately 40 feet in height, was observed standing on the first rung of the rails, reaching out to the work, he was not standing firmly on the floor of the lift and in addition the employee was not secured by a safety harness/lanyard. On or about 12/20/96. ABATEMENT NOTES: Among other methods,one feasible method to reduce this hazard is to 1 (a) Train the operators to comply with the ANSI standard A92.6-1979 section 14.2.6 which states,personnel shall maintain a firm footing on the platform while working theron unless they are secured by safety harness/lanyard fixed to manufacturer approved hard points. Use of railings or planks,ladders or any other device on the work platform not conforming to 14.3.3 for achieving additional height shall be prohibited.