Translate
Violation Detail
Standard Cited: 19100147 C07 III A The control of hazardous energy (lockout/tagout).
Inspection Nr: 1817078.015
Citation: 01001
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $14,188.00
Current Penalty: $11,000.00
Issuance Date: 09/03/2025
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 10/21/2025
Gravity: 5
Report ID: 0728900
Contest Date:
Final Order: 09/30/2025
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/30/2025 | $11,000.00 | 10/21/2025 | Other | |
| Penalty | Z: Issued | 09/03/2025 | $14,188.00 | 10/21/2025 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(7)(iii)(A) Retraining was not provided for authorized and affected employees when there was a change in their job assignments, a change in machines, equipment or processes that presented a new hazard, or when there was a change in the energy control procedures: Employee(s) were exposed to amputation hazards while performing maintenance. This was documented on or about April 9, 2025, at 4200 Hwy 30 East, Kearney, Nebraska. Employees were exposed to amputations in that the energy sources were not removed from the Forge Lube Vac Truck Tank prior to removing guards for a belt and pulley. The power cord was not disconnected from the power source which allowed the machine to start while the employee was exposed to an amputation hazard (in-running nip point). Cord and plug devices must be unplugged and the cord maintained under the exclusive control of the person bypassing a guard or performing maintenance per the standard in order to render the machine safe.