Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1773435.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $11,292.00
Current Penalty: $6,775.20
Issuance Date: 09/18/2024
Nr Instances: 3
Nr Exposed: 4
Abatement Date: 10/18/2024
Gravity: 10
Report ID: 0523900
Contest Date:
Final Order: 10/09/2024
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/09/2024 | $6,775.20 | 10/18/2024 | Serious | |
| Penalty | Z: Issued | 09/18/2024 | $11,292.00 | 10/09/2024 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Storm window line, saw 1; On or about August 26, 2024, and dates prior, adequate point of operation guarding was not provided on a Sampson double miter saw (serial no. 11317) being used to cut aluminum extrusion. (b) Storm window line, saw 2; On or about August 26, 2024, and dates prior, adequate point of operation guarding was not provided on a Sampson model SC-12 straight cut saw (serial no. 91032) being used to cut aluminum extrusion. (c) Storm window line, saw 2; On or about August 26, 2024, and dates prior, employees were not protected from a pinch point created by the pneumatic action when the Sampson model SC-12 straight cut saw (serial no. 91032) returns from the lowered cutting position to the upward position.