Powered by GoogleTranslate

Violation Detail

Standard Cited: 19100028 B07 Duty to have fall protection and falling object protection.

Inspection Nr: 1705723.015

Citation: 01001

Citation Type: Serious

Abatement Status: Abatement Completed

Initial Penalty: $14,518.00

Current Penalty: $8,500.00

Issuance Date: 03/12/2024

Nr Instances: 1

Nr Exposed: 3

Abatement Date: 03/29/2024

Gravity: 10

Report ID: 0316700

Contest Date:

Final Order: 04/03/2024

Related Event Code (REC): A;R

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty I: Informal Settlement 04/03/2024 $8,500.00 03/29/2024 Serious  
Penalty Z: Issued 03/12/2024 $14,518.00 03/29/2024 Serious  

Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.28(b)(7): The employer did not ensure that each employee on a walking-working surface near an opening, including one with a chute attached, where the inside bottom edge of the opening is less than 39 inches (99 cm) above that walking-working surface and the outside bottom edge of the opening is 4 feet (1.2 m) or more above a lower level is protected from falling by the use of one of the systems listed in 29 CFR 1910.28(b)(7)(i)-(iv). 29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached) where the outside bottom edge of the wall opening is 6 feet or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 m) above the walking/working surface, shall be protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system. (a)The Village at Penn State, 260 Lions Hill Rd, Apt 212. On or about October 24, 2023, an employee was working thru a wall opening (open window), cleaning an adjacent window. The employee was not utilizing any form of fall protection and was working approximately 21'3" above grade. Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close