Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(4)(ii): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C), and (c)(4)(ii)(D). At an establishment located at 4852 Elm Street in Laona, Wisconsin; (a) On or about September 13, 2023, employees were required to perform setup, maintenance, and servicing tasks on the Burkle Stain Coater, Burkle Oil Coater, and Burkle Top Coater, the procedures did not clearly and specifically outline the scope, purpose, authorization, rules and techniques and the procedure did not address the pneumatic, hydraulic, and gravitational energy sources and location to de-energize, steps to verify de-energization, and the means to enforce compliance. (b) During the week of October 23, 2023, employees were required to perform setup, maintenance, and servicing tasks on the Costa Belt Sander, the procedures did not clearly and specifically outline the scope, purpose, authorization, rules and techniques and the procedure did not address the pneumatic energy source and location to de-energize, steps to verify de-energization, and the means to enforce compliance.