Violation Detail
Standard Cited: 19100028 B03 IV Duty to have fall protection and falling object protection.
Inspection Nr: 1683623.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $8,595.00
Current Penalty: $4,297.50
Issuance Date: 12/22/2023
Nr Instances: 3
Nr Exposed: 3
Abatement Date: 01/24/2024
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 01/23/2024
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 01/23/2024 | $4,297.50 | 01/24/2024 | Serious | |
Penalty | Z: Issued | 12/22/2023 | $8,595.00 | 01/24/2024 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.28(b)(3)(iv): Each employee is protected from falling into a ladderway floor hole or ladderway platform hole by a guardrail system and toe boards erected on all exposed sides, except at the entrance to the hole, where a self-closing gate or an offset must be used; At an establishment located at 121 Cedar Street, in Tigerton, Wisconsin; (a) On or about July 19, 2023, located outside the Sawmill, the two fixed ladders on either side of the yellow platform used by employees to inspect the level of material in the trailers did not have a self-closing gate or offset exposing employees to fall hazards over six feet. (b) On or about October 13, 2023, located outside the Planer Building, the two fixed ladders on either side of the yellow platform used by employees to inspect the level of material in the trailer(s) did not have a self-closing gate or offset exposing employees to fall hazards over six feet. (c) On or about July 28, 2023, in the Chipper Building, the black fixed ladder used to access an elevated platform for the dust blower did not have a self-closing gate or offset exposing employees to fall hazards of approximately 79.5 inches.