Translate
Violation Detail
Standard Cited: 19100147 C04 II The control of hazardous energy (lockout/tagout).
Inspection Nr: 1626790.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $14,063.00
Current Penalty: $14,063.00
Issuance Date: 03/16/2023
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 03/28/2023
Gravity: 10
Report ID: 0213100
Contest Date: 03/27/2023
Final Order: 02/19/2024
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 02/19/2024 | $14,063.00 | 03/28/2023 | Serious | |
| Penalty | C: Contested | 03/27/2023 | $14,063.00 | 03/28/2023 | Serious | |
| Penalty | Z: Issued | 03/16/2023 | $14,063.00 | 03/28/2023 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items of this section: a) Discharge Conveyor on the Milling Machine - On or prior to October 5, 2022, an employee for D. A. Collins Construction Co., Inc. was exposed to caught-in hazards on a Discharge Conveyor on a Wirtgen W220i Milling Machine ((#6485)(Serial Number: 07220018)) when performing servicing and/or maintenance tasks such as, but not limited to, inspecting the Discharge Conveyor while the Discharge Conveyor is running at a low speed, and without guards in place. The energy control procedures in place did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized by employees to turn off and control the hazardous energy on the Discharge Conveyor when performing greasing and inspecting tasks on a Wirtgen W220i Milling Machine.