Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1568172.015
Citation: 01001
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $14,502.00
Current Penalty: $11,500.00
Issuance Date: 05/06/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 06/02/2022
Gravity: 10
Report ID: 0728500
Contest Date:
Final Order: 06/16/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/16/2022 | $11,500.00 | 06/02/2022 | Other | |
| Penalty | Z: Issued | 05/06/2022 | $14,502.00 | 06/02/2022 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At the workplace located at 898 East Commercial, Mansfield, Missouri 65704, employees were exposed to serious caught-in and crushed-by point of operation hazards when placing parts in a jig to be welded. The jig has magnets to hold the parts in place until the jig is closed. However, the magnets don't always hold the parts in place and have to be held by hand until the jig closes. This caused the injured employee to have his finger partially amputated. This was documented on or about 12/08/2021.