Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1535350.015
Citation: 01001
Citation Type: Serious
Abatement Status:
Initial Penalty: $13,653.00
Current Penalty: $13,653.00
Issuance Date: 10/04/2021
Nr Instances: 4
Nr Exposed: 3
Abatement Date: 11/22/2021
Gravity: 10
Report ID: 0420600
Contest Date: 10/29/2021
Final Order:
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | C: Contested | 11/05/2021 | $13,653.00 | 11/22/2021 | Serious | |
| Penalty | Z: Issued | 10/04/2021 | $13,653.00 | 11/22/2021 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Finishing Department: On or about 6/9/2021, during the grinding operations the inker, spindle and grinder of the Chevalier - Lathe Plus (CNC) with an attached Grinder (Number: X1855001) were not guarded, exposing employees to caught-in and struck-by hazards created by rotating parts and ingoing nip points. b) Finishing Department: On or about 6/9/2021, during the grinding operations the inker, spindle and grinder of the Chevalier - Lathe Plus (CNC) with an attached Grinder (Number: X1866009) were not guarded, exposing employees to caught-in and struck-by hazards created by rotating parts and ingoing nip points. c) Finishing Department: On or about 6/9/2021, during the polishing operations the inker and spindle of the Chevalier - Lathe Plus (CNC) with an attached Grinder (Number: X1855001) were not guarded, exposing employees to caught-in hazards created by rotating parts. d) Finishing Department: On or about 6/9/2021, during the polishing operations the inker and spindle of the Chevalier - Lathe Plus (CNC) with an attached Grinder (Number: X1866009) were not guarded, exposing employees to caught-in hazards created by rotating parts.