Translate
Violation Detail
Standard Cited: 19100028 B06 I Duty to have fall protection and falling object protection.
Inspection Nr: 1527266.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,510.00
Current Penalty: $7,510.00
Issuance Date: 10/20/2021
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 11/23/2021
Gravity: 5
Report ID: 0523400
Contest Date: 11/15/2021
Final Order: 12/16/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 12/16/2024 | $7,510.00 | 11/23/2021 | Serious | |
| Penalty | C: Contested | 12/01/2021 | $7,510.00 | 11/23/2021 | Serious | |
| Penalty | Z: Issued | 10/20/2021 | $7,510.00 | 11/23/2021 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.28(b)(6)(i): The employer did not ensure that each employee less than 4 feet (1.2 m) above dangerous equipment is protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard. (a) Pit Mounted Centrifugal Casting Machine "A Spinner": On or about April 26, 2021, the employer did not ensure that employees working at or around the edge of the pit were protected from falling into the spinner pit or onto the spinner machine while the spinner machine was spinning. This exposed employees to a fall hazard of five feet two inches (5'2") to the bottom of the spinner pit and a fall hazard onto rotating spinning machine equipment. This hazard area is exposed during spinner machine setup operations, and maintenance and servicing operations.