Translate
Violation Detail
Standard Cited: 19150089 G01
Inspection Nr: 1520509.015
Citation: 01001
Citation Type: Serious
Abatement Date: 10/12/2021 2
Initial Penalty: $13,653.00
Current Penalty: $6,826.50
Issuance Date: 09/15/2021
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): A
Gravity: 10
Report ID: 0316300
Contest Date:
Final Order: 10/06/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/06/2021 | $6,826.50 | 10/12/2021 | Serious | |
| Penalty | Z: Issued | 09/15/2021 | $13,653.00 | 10/12/2021 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1915.89(g)(1): Before servicing machinery, equipment, or a system that had a lockout/tags-plus system, the employer did not ensure that the authorized employee, or the primary authorized employee in a group lockout/tags-plus application, verified that the machinery, equipment, or system was deenergized and all energy sources isolated. On or about 03-15-2021, and times prior thereto, onboard the USS McFaul, DDG-74 located at General Dynamics - NASSCO Norfolk 200 Ligon Street. Norfolk, VA 23523: Employee(s) were exposed to pinch point and crushing hazards from a gas turbine engine blow-in door that was tagged out in the "open" position and not de-pressurized, de-energized, restrained, or isolated from all energy sources of power. No other verification of additional safety measures necessary to provide the equivalent safety available from the use of a lock was implemented. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employee(s) and their representatives were informed of this abatement.