Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1508544.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $5,461.00
Current Penalty: $4,100.00
Issuance Date: 02/19/2021
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 03/08/2021
Gravity: 10
Report ID: 0111700
Contest Date:
Final Order: 03/10/2021
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/10/2021 | $4,100.00 | 03/08/2021 | Serious | |
| Penalty | Z: Issued | 02/19/2021 | $5,461.00 | 03/08/2021 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Worksite - On or about January 5, 2021, employees working with the Baileigh Industrial press brake were not protected from point of operation hazards where the opening to the clamp was one inch and they are required to place their fingers within approximately one half inch of the clamp to hold metal in place. This resulted in the partial amputation of an employee's finger when it slipped into the one inch space while clamping metal.