Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 1469517.015
Citation: 01001
Citation Type: Willful
Abatement Status: Abatement Completed
Initial Penalty: $107,950.00
Current Penalty: $53,975.00
Issuance Date: 09/04/2020
Nr Instances: 1
Nr Exposed: 11
Abatement Date: 04/01/2021
Gravity: 10
Report ID: 0830500
Contest Date: 09/25/2020
Final Order: 05/27/2021
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/27/2021 | $53,975.00 | 04/01/2021 | Willful | |
| Penalty | C: Contested | 09/25/2020 | $107,950.00 | 10/05/2020 | Willful | |
| Penalty | Z: Issued | 09/04/2020 | $107,950.00 | 10/05/2020 | Willful |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as sheave wheels on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform were not guarded with a disk covering the spokes: a) Cartel Drilling, LLC, TeVelde 28-3HZ, WCR 17/18, Firestone, CO 80504: On or before March 8, 2020, Cartel Drilling did not guard the pulldown sheave assembly located on the working platform where drilling operations take place. During tripping out of hole (TOOH) operations, an employee reached over to grab the tong line to keep it from entangling with the pulldown sheave assembly. As the employee was grabbing the tong line, the driller actuated the pull down sheave which resulted in the employee's hand being pulled into the unguarded pull down sheave assembly. This condition resulted in an amputation of an employee's two fingers.