Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1460305.015
Citation: 01001
Citation Type: Serious
Abatement Date: 05/21/2020 2
Initial Penalty: $9,446.00
Current Penalty: $6,139.90
Issuance Date: 04/27/2020
Nr Instances: 1
Nr Exposed: 4
Related Event Code (REC):
Gravity: 10
Report ID: 0418300
Contest Date:
Final Order: 05/19/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/19/2020 | $6,139.90 | 05/21/2020 | Serious | |
| Penalty | Z: Issued | 04/27/2020 | $9,446.00 | 05/21/2020 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) On or about 01/25/2020 - 2000 John D Long Drive SE, Hartselle, AL, employees were exposed to caught-in and electrical hazards when an overall energy control program was not established to control potentially hazardous energy when employees were servicing and maintaining such as, but not limited to, adjusting sensors and/or removing stuck rubber bumper plates from the hydraulic rubber press machines also know as bumper plate mold machines.