Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1458609.015
Citation: 01001
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $134,937.00
Current Penalty: $13,494.00
Issuance Date: 05/05/2020
Nr Instances: 26
Nr Exposed: 2
Abatement Date:
Gravity: 10
Report ID: 0524500
Contest Date: 05/29/2020
Final Order: 12/24/2020
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 12/24/2020 | $13,494.00 | Serious | ||
| Penalty | C: Contested | 07/08/2020 | $134,937.00 | Willful | ||
| Penalty | Z: Issued | 05/05/2020 | $134,937.00 | Willful |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about January 23, 2020, employees were exposed to machine hazards associated with moving parts, in-going nip points, and entanglement hazards when servicing Carter Day Sizers. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(S)(i)J, and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.