Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1448928.015
Citation: 01001
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $13,494.00
Current Penalty: $13,494.00
Issuance Date: 02/11/2020
Nr Instances: 1
Nr Exposed: 18
Abatement Date:
Gravity:
Report ID: 0521100
Contest Date:
Final Order: 02/28/2020
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/28/2020 | $13,494.00 | Other | ||
| Penalty | Z: Issued | 02/11/2020 | $13,494.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. On November 16, 2019 at 220 Industrial Avenue in Clintonville, employees were operating the T-Nut Power Press without adequate machine guarding at the point of operation; guard opening five and one half inches H by twenty-seven inches W at forty-two inches above surface level with the press action point ten and one half inches from the opening.