Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1439889.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,630.00
Current Penalty: $3,978.00
Issuance Date: 11/18/2019
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 03/31/2020
Gravity: 5
Report ID: 0521400
Contest Date:
Final Order: 12/12/2019
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $3,978.00 | 03/31/2020 | Serious | ||
| Penalty | I: Informal Settlement | 12/12/2019 | $3,978.00 | 01/31/2020 | Serious | |
| Penalty | Z: Issued | 11/18/2019 | $6,630.00 | 12/26/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. Bindery department, UV Coater: on or about October 22, 2019, the control of hazardous energy (lockout/tagout) program was not established in the workplace for safety during servicing and/or maintenance tasks. Operators assigned to set up energized equipment had their fingers exposed to ingoing nip point hazards likely to result in serious injury when cleaning rotating rollers. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).