Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1439774.015
Citation: 01001
Citation Type: Serious
Abatement Status:
Initial Penalty: $11,934.00
Current Penalty: $0.00
Issuance Date: 11/27/2019
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 12/24/2019
Gravity: 10
Report ID: 0626300
Contest Date: 12/17/2019
Final Order: 03/24/2020
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/24/2020 | $0.00 | 12/24/2019 | Serious | |
| Penalty | C: Contested | 12/27/2019 | $11,934.00 | 12/24/2019 | Serious | |
| Penalty | Z: Issued | 11/27/2019 | $11,934.00 | 12/24/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. a. This violation occurred on or about October 19, 2019, where a meat cutter was exposed to amputation hazards by placing their hands near the point of operation while operating a Hobart meat cutting band saw.