Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1435542.015
Citation: 01001
Citation Type: Willful
Abatement Status: Abatement Completed
Initial Penalty: $118,745.00
Current Penalty: $81,500.00
Issuance Date: 03/13/2020
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 03/24/2020
Gravity: 10
Report ID: 0524500
Contest Date: 04/03/2020
Final Order: 09/18/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 09/18/2020 | $81,500.00 | 03/24/2020 | Willful | |
| Penalty | C: Contested | 04/20/2020 | $118,745.00 | 03/24/2020 | Willful | |
| Penalty | Z: Issued | 03/13/2020 | $118,745.00 | 03/24/2020 | Willful |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about September 20, 2019, an employee was exposed to physical injury, while performing the setup operation of stringing line at the roll stand on Line 7. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.