Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.28(b)(3)(ii): (ii) Each employee is protected from tripping into or stepping into or through any hole that is less than 4 feet (1.2 m) above a lower level by covers or guardrail systems. Seneca Foods Corporation did not ensure each employee is protected from tripping into or stepping into or through holes: a) while working on the 20 inch by 22 inch platform to the right side of Cutter #1 with the platform surrounded by open areas of at least six inches in width. b) while working on the 20 inch by 22 inch platform to the right side of Cutter #2 with the platform surrounded by open areas of at least six inches in width. c) while working on the 20 inch by 22 inch platform to the right side of Cutter #3 with the platform surrounded by open areas of at least six inches in width. d) while working on the 20 inch by 22 inch platform to the right side of Cutter #4 with the platform surrounded by open areas of at least six inches in width. e) while working on the 20 inch by 22 inch platform to the right side of Cutter #5 with the platform surrounded by open areas of at least six inches in width. f) while working on the 20 inch by 22 inch platform to the right side of Cutter #6 with the platform surrounded by open areas of at least six inches in width. g) while working on the 20 inch by 22 inch platform to the right side of Cutter #7 with the platform surrounded by open areas of at least six inches in width. h) while working on the 20 inch by 22 inch platform to the right side of Cutter #8 with the platform surrounded by open areas of at least six inches in width. i) while working on the 20 inch by 22 inch platform to the right side of Cutter #9 with the platform surrounded by open areas of at least six inches in width. j) while working on the 20 inch by 22 inch platform to the right side of Cutter #10 with the platform surrounded by open areas of at least six inches in width. k) while working on the 20 inch by 22 inch platform to the right side of Cutter #11 with the platform surrounded by open areas of at least six inches in width. . l) while working on the 20 inch by 22 inch platform to the right side of Cutter #12 with the platform surrounded by open areas of at least six inches in width. m) while working on the 20 inch by 22 inch platform to the right side of Cutter #13 with the platform surrounded by open areas of at least six inches in width. n) while working on the 20 inch by 22 inch platform to the right side of Cutter #14 with the platform surrounded by open areas of at least six inches in width. o) while working on the 20 inch by 22 inch platform to the right side of Cutter #15 with the platform surrounded by open areas of at least six inches in width. p) while working on the 20 inch by 22 inch platform to the right side of Cutter #16 with the platform surrounded by open areas of at least six inches in width. q) while working on the 20 inch by 22 inch platform to the right side of Cutter #17 with the platform surrounded by open areas of at least six inches in width. r) while working on the 20 inch by 22 inch platform to the right side of Cutter #18 with the platform surrounded by open areas of at least six inches in width. s) while working on the 20 inch by 22 inch platform to the right side of Cutter #19 with the platform surrounded by open areas of at least six inches in width. t) while working on the 20 inch by 22 inch platform to the right side of Cutter #20 with the platform surrounded by open areas of at least six inches in width. u) while working on the 20 inch by 22 inch platform to the right side of Cutter #21 with the platform surrounded by open areas of at least six inches in width. v) while working on the 20 inch by 22 inch platform to the right side of Cutter #22 with the platform surrounded by open areas of at least six inches in width. w) while working on the 20 inch by 22 inch platform to the right side of Cutter #24 with the platform surrounded by open areas of at least six inches in width. x) while working on the Cutter Deck when a hole existed on the end of the deck, near Cutters #25 and #26 that measured 18 inches by 10 inches.