Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1428081.015
Citation: 01001
Citation Type: Serious
Abatement Date: 11/21/2019 2
Initial Penalty: $11,934.00
Current Penalty: $6,000.00
Issuance Date: 10/03/2019
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 10/16/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/16/2019 | $6,000.00 | 11/21/2019 | Serious | |
| Penalty | Z: Issued | 10/03/2019 | $11,934.00 | 11/21/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. a)On 8/29/2019 a Victor Lathe (Model # 2080S) was rotating at 20 RPMS, while an employee was attaching a upper punch pin into the chuck of the lathe, this allowed the employee to be pulled into the lathe due to the attachment section not having a guarding method such as but not limited to either barrier guards or electronic safety guards that would prevent employees from accessing the rotating parts.