Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) was not done in sequence to achieve energy control by performing the following steps as required by 29 CFR 1910.147(d)(1)-(6): 1. Turn off and shut down power to the machinery, 2. Physically locate and operate energy-isolating devices in such a manner as to isolate the machine or equipment from the energy source(s), 3. Affix lockout/tagout devices to each energy isolating device, 4. Verify isolation and de-energization of machinery have been accomplished prior to starting the maintenance and/or servicing work: a) Deli Department: Slicer- On or about June 27, 2019, the employer did not ensure that the employee(s) who clean and disassemble the deli slicers utilized the established procedures to de-energize equipment to achieve energy control or unplug the equipment and have the power source under the exclusive control of the operator.