Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1393619.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $13,260.00
Current Penalty: $9,282.00
Issuance Date: 06/28/2019
Nr Instances: 1
Nr Exposed: 6
Abatement Date: 07/29/2019
Gravity: 10
Report ID: 0521100
Contest Date:
Final Order: 07/19/2019
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/19/2019 | $9,282.00 | 07/29/2019 | Serious | |
| Penalty | Z: Issued | 06/28/2019 | $13,260.00 | 07/29/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: On or about April 17, 2019, employees were exposed to machine hazards associated with moving parts and crushing when they engaged in change over activities on the Civiemmic Bundler. The employer did not ensure that energy control application steps to control the pneumatic and electrical energy sources were implemented prior to allowing employees to change the forks on the Civiemmic Bundler. The machine was not shut down or turned off prior to engaging in this servicing and maintenance activity. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lockout/tagout device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)(i)], and verification of isolation [1910.147(d)(6)] were not implemented to protect employees from machine servicing hazards."