Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1367536.015
Citation: 01001
Citation Type: Other
Abatement Date: 06/18/2019 2
Initial Penalty: $18,564.00
Current Penalty: $6,603.00
Issuance Date: 05/22/2019
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC): R
Gravity:
Report ID: 0420600
Contest Date:
Final Order: 06/18/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/18/2019 | $6,603.00 | 06/18/2019 | Other | |
| Penalty | Z: Issued | 05/22/2019 | $18,564.00 | 06/18/2019 | Repeat |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about 12/07/2018, at the welding department, an employee suffered an amputation of the tip of the right thumb during the cutting of two 1x1 inch pieces of steel tube with a Kysor Johnson horizontal band saw. The band saw blade had an unguarded portion of approximately four and three quarter inches (4 3/4") at the point of operation. Air Distributors, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(3)(ii), which was contained in OSHA inspection number 1245692, citation number 1, item number 2 and was affirmed as a final order on 12/27/2017, with respect to a workplace located at 2541 W. Dunnellon Rd, Dunnellon, FL.