Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1363206.015
Citation: 01001
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $9,472.00
Current Penalty: $9,472.00
Issuance Date: 05/14/2019
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 06/10/2019
Gravity:
Report ID: 0418600
Contest Date:
Final Order: 05/31/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/31/2019 | $9,472.00 | 06/10/2019 | Other | |
| Penalty | Z: Issued | 05/14/2019 | $9,472.00 | 06/10/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Line 1 extrusion machine; On or about November 27, 2018 and at times prior, the employer exposed employees to the hazardous energies, including but not limited to electrical and pneumatic, present on machinery in that the employer failed to develop and document machine specific energy control procedures to protect employees while employees were required to perform servicing and maintenance tasks. b) Line 2 extrusion machine; On or about November 27, 2018 and at times prior, the employer exposed employees to the hazardous energies, including but not limited to electrical and pneumatic, present on machinery in that the employer failed to develop and document machine specific energy control procedures to protect employees while employees were required to perform servicing and maintenance tasks. c) Line 3 slit film extrusion machine; On or about November 27, 2018 and at times prior, the employer exposed employees to the hazardous energies, including but not limited to electrical and pneumatic, present on machinery in that the employer failed to develop and document machine specific energy control procedures to protect employees while employees were required to perform servicing and maintenance tasks.