Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1357170.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $8,856.00
Current Penalty: $0.00
Issuance Date: 04/17/2019
Nr Instances: 3
Nr Exposed: 2
Abatement Date: 05/06/2019
Gravity: 5
Report ID: 0418600
Contest Date:
Final Order: 05/08/2019
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/08/2019 | $0.00 | 05/06/2019 | Serious | |
| Penalty | Z: Issued | 04/17/2019 | $8,856.00 | 05/06/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Lathe No. 1: On or about October 31, 2018 and at times prior thereto, the employer did not ensure a chuck guard and chip shield were used which exposed employees to injuries associated with making direct and indirect contact with moving machinery and stock as well as flying metal debris. b) Lathe No. 2: On or about October 31, 2018 and at times prior thereto, the employer did not ensure a chuck guard and chip shield were used which exposed employees to injuries associated with making direct and indirect contact with moving machinery and stock as well as flying metal debris. c) Lathe No. 3: On or about October 31, 2018 and at times prior thereto, the employer did not ensure a chuck guard and chip shield were used which exposed employees to injuries associated with making direct and indirect contact with moving machinery and stock as well as flying metal debris.