Translate
Violation Detail
Standard Cited: 19100179 J02 Overhead and gantry cranes.
Inspection Nr: 1338794.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $12,934.00
Current Penalty: $6,467.00
Issuance Date: 09/26/2018
Nr Instances: 3
Nr Exposed: 12
Abatement Date: 10/31/2018
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 10/15/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/15/2018 | $6,467.00 | 10/31/2018 | Serious | |
| Penalty | Z: Issued | 09/26/2018 | $12,934.00 | 10/31/2018 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.179(j)(2): Frequent inspection. The following items shall be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections. All deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard: a. On or about August 15, 2018, a 30/10 ton "center" crane (manufacturer unknown, no label) was being used to move materials throughout the shop area. The employer did not ensure that the 30/10 ton center crane was inspected at frequent/regular intervals for defects that could present a safety hazard for employees working in the shop. b. On or about August 15, 2018, a Kone 15 ton overhead ("North") crane was being used to move materials throughout the shop area. The employer did not ensure that the North crane was being inspected at frequent/regular intervals for defects that could present a safety hazard for employees working in the shop. c. On or about August 15, 2018, a Kone 15 ton overhead ("South") crane was being used to move materials throughout the shop area. The employer did not ensure that the South crane was being inspected at frequent/regular intervals for defects that could present a safety hazard for employees working in the shop.