Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) Production Area- On or about May 8, 2018, the employer failed to establish a Lockout Tagout Program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on machines, such as the Towel Folding Machines, Wash Line Machines, where the unexpected energization, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. b) Wash Line- On or about May 8, 2018, the employer failed to establish a Lockout Tagout Program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performing unjamming of machines, such as the Wash Line Machines, where the unexpected energization, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.