Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1313268.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,054.00
Current Penalty: $7,000.00
Issuance Date: 08/10/2018
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 08/29/2019
Gravity: 10
Report ID: 0524700
Contest Date: 09/06/2018
Final Order: 07/29/2019
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 07/29/2019 | $7,000.00 | 08/29/2019 | Serious | |
| Penalty | C: Contested | 09/07/2018 | $9,054.00 | 09/05/2018 | Serious | |
| Penalty | Z: Issued | 08/10/2018 | $9,054.00 | 09/05/2018 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a.) On or about May 2, 2018 the employer did not ensure employees were protected while using the Bridgeport Series I Vertical Mill. Employees are required to use the mill to drill holes into metal parts and are exposed to caught by hazards in that the chuck is not guarded.